Shugart Manufacturing, A Division of James T. Triplett, Inc.
home about us barges barge pushers barge accessories screeds work bridges custom fabrication contact us
  barges < regular
   barges < pinning system    regular barge    double stack    heavy-duty    configuration    applications
Shugart’s REGULAR barge comes in one size (5x10), 10’4” wide, measured from center to center of the connecting pinholes. The actual work surface is 10’, in keeping with the accepted construction principle of sizing in multiples of 10. Both sizes are 5’ deep. The REGULAR barges are available in lengths equal to two, three, or four times barge width (length must always be a multiple of the width to allow for proper connection and stability).

Technical Specifications
Dimensions Weight (approximate)

Shugart’s REGULAR barge - size 5x10
10’4” x 5’ x 41’4”
27,000 lbs.  
*Dimensions are center to center of connections for rake and all sections
*Overall Dimensions are 10’8” wide x 5’ high x length
*Payload Per Barge: 37.5 tons with 1 foot of free board (for each 41’4” section)
*No Load Draft: Approximately 12”
10’4” x 5’ x 31’0"
22,500 lbs.  
10’4” x 5’ x 20’8”
15,000 lbs.  
  ©2003 Shugart Manufacturing